Control by Web X420 – SNMP

To login to the device, go to http://192.168.1.2/setup.html.  The Username is “admin” and the Password is “webrelay”.  Once logged in you will see this screen below.

Configuring SNMP

To configure SNMP settings, go to General Settings>Advanced Network and then scroll down to SNMP Agent.  Click yes to Enable SNMP.

You may also change the SNMP community by going to the section labeled Agent Read Community and typing in a new community string. You will need this community string when you add this device to Critical Labs. Once you have changed all these options, click Submit.

Configuring DHCP (optional)

If you wish to change the device’s IP from static to DHCP, click on General Settings>Network then navigate to Use DHCP and select Yes. Once changes have been made click the Submit button.

Close Bitnami banner
Bitnami